Material Presentation- QUIET BOARD FOR SOUND INSULATION

DESCRIPTION:

IT is comprised of porous expanded polypropylene beads, which are formed into a semi rigid,water resistant panel.
The cylinder shaped beads are nonporous,but the hollow cores and cracks between adjacent beads allow sound to travel into the panel where it is absorbed.

APPLICATIONS:

IT can be installed as a wall panel, ceiling tile and hanging baffle.

Due to its water resistant properties, it may be used in marine applications.

Practical applications are:
indoor swimming pools, locker rooms, auditoriums, gymnasiums, classrooms,
arenas/stadiums, laboratories, computer rooms, clean rooms, food preparation areas, manufacturing facilities, machine shops, gun ranges and machine enclosures (i.e. compressors, pumps and air conditioner units).

PRODUCT AVAILABILITY:

1 x 24 x 48 inch white panels
2 x 24 x 48 inch white Panels

1 x 24 x 48 inch charcoal panels
2 x 24 x 48 inch charcoal panels

•Custom sizes available

SOUND TRANSMISSION LOSS

Freq. Hz 125 250 500 1000 2000 5000 STC

1“ (dB) 6 5 7 8 10 15 9
2“ (dB) 9 8 10 10 17 22 13

INSTALLATION:

Panels are placed directly on walls for sound insulation.
The surface on which the panels are placed is made rough for the panel to get stuck to the surface.
Placing of the panel starts from the bottom of the wall.
The panels are stuck to the wall with the help of adhesives.
The top panel sizes are cut according to the required dimension with the help of knife.

CUTTING METHOD:

Mark the QUIET BOARD panel at the desired dimensions.

Place the panel on the edge of a table or work bench. Doing this provides adequate space for the serrated knife to travel totally through thickness of the panel.

Using a straight edge as a guide, cut the panel with the serrated knife using a sawing motion.

Firmly hold the serrated knife at a 30 – 45 degree angle as you cut.

ADHESIVE

Loctite Power Grab:
IT is an advanced construction adhesive technology for multi-surface usage. It eliminates the need for nails and screws.
IT dries in approximately 24 hours.
Use 1 Tube per three 4 ft. x 8 ft. sheets (MEANS 2 PANELS IN 1 TUBE).

Comments

Architectural History of Ahmadabad City

Hello Friends , We have created a Youtube Chaneel of Architectural world , Where we will be sharing Architectural Presentations of Famous Architects , there works and History . We will be also sharing presentations of Numerous building as well as Architectural styles . Today we have added presentation of Architectural History of Ahmadabad City , Please check the video and Subscribe to our Architectural Knowledge channel for more valuable videos.

CONTEMPORARY CITY FOR THREE MILLION INHABITANTS

Urban design by Le Corbusier, 1922 Exhibited in 1922 at the Salon d’Automne in Paris, the Contem-porary City for Three Million Inhabitants was Le Corbusier’s first comprehensive urban-planning project. Accompanied by a 100-square-meter diorama, it consisted of a rigidly geometric, centralized orthogonal plan with monumental axes, uniform modern buildings, vast expanses of open space covering 85 to 95 percent of the surface, and a system of highways. The project was seen simultaneously as a breathtaking modern vision and as the destruction of the familiar urban setting. Influence on the project ranged from American gridded cities, Peter Behrens’ work, and Tony Garnier’s Une Cité industrielle (1901–04, 1917; An Industrial Town) to Bruno Taut’s Utopian Die Stadtkrone (1919; The City Crown). By 1922 Le Corbusier was one of the major figures of the Modern movement, and the Contemporary City marked a high point in a period of extraordinary activity. It incorporated two ideas that he had been...

DOM-INO HOUSES

Housing design by Le Corbusier, 1914–15 and later Between 1914 and 1915, Le Corbusier, partly encouraged by his friend Max du Bois, conceived of a standardized system of construction using reinforced concrete, which was to provide the structural basis of most of his houses through the mid-1930s. These were the Dom-ino prefabricated houses with independent skeletons. The frame was to be completely independent of the floor plans of the houses. Derived from the Hennebique frame, it consisted of six thin concrete columns that simply carried two horizontal slabs as the floors. The columns and slabs were connected by staircases. Apart from this structural core of the houses, nothing else was fixed, thus permitting a great flexibility to suit demands on the basis of aesthetics, climate, composition, or view. The floor plan was also extremely flexible, as interior partitions were independent of the grid. This utterly simple and clear “open plan” method did away with load-carrying walls. Suppor...

ARCHITECTURAL WORLD

Search This Blog