Adhesive Vinyl Floor Tiles

Ready for a new look in your kitchen or bathroom? Or perhaps your flooring is just starting to seem worn out? Adhesive vinyl Floor tiles are a good option, giving you versatility for a reasonable cost. Here we will look at what you need to know about adhesive vinyl Floor tiles and how to get the most for your money.

Planning the project

Laying adhesive vinyl Floor tiles is a project of moderate difficulty, requiring a certain amount of patience and precision. To make your selection for a design or style, you can either take a trip through your phone book to check out local flooring outlets, or you can go online. Many companies do not charge shipping.

Costs for adhesive vinyl Floor tiles range from around $45 a box, or about 75 cents to $3 a square foot. You can achieve the look of ceramic tiles, wood or stone with adhesive viny! Floor tiles.

Sizing

You will need to know the square footage of the room in which you plan to lay adhesive viny! Floor tiles. Tiles are 12” by 12” and come in varying thicknesses. Don’t go for the very thin tiles, as they will wear out quickly.

Once you know the square footage of the room. You can estimate the cost and number of tiles needed. It’s good idea to purchase a few extra tiles in case of mistakes. For example, if you have an 8’ by 10’ room (80 square feet), buy 90 tiles. Then you gave 10 extra tiles to work with.

The tools

 You will need the following tools to set your adhesive viny! Floor tiles:

•  Measuring tape

•  Utility knife or tile cutter (you can rent tile cutters)

•  Chalk line

•  Tile roller ( also can be rented-some people use a large rolling pin)

Important tips

I can’t emphasize enough that the floor surface (linoleum, plywood, cement, etc.) must be clean and free of holes, cracks, dips or any other damage. Sand, dirt and grit will inhibit the bonding process, as will old adhesives or a glossy surface. Make sure your surfaces are dry before laying down adhesive viny! Floor tiles.

Leave the in your home for 24 to 48 hours to allow them to adjust to the temperature. You will need to pry off any molding and replace it after you lay the tiles. Sun can damage or bleach tiles, so you may need a throw rug here or there once the tiles are laid. Don’t take the paper off of the tiles and begin laying them until you are absolutely sure of your .

Measuring

Separate the room into quadrants. Using a chalk line, find the center of the room and lay two sharp cross lines. Find the center of the room by measuring the center of each wa;; and snapping the chalk line between opposing walls. Vents, door jambs or fixtures such as tubs will require careful measurements. You will likely need to trim some tiles with a utility knife.

Laying adhesive vinyl Floor tiles

The first tiles you lay is the most important. If that is off, the rest will be off too. Work in quadrants. If you are nervous, lay the tile with the paper backing on first. This may be more time consuming, but you’ll get a better visual which will help you feel more confident. You will likely have to cut tiles to fit the edges of the room and around spots such as vents. A tile cutter will make the job easier and more precise.

Once you have laid the adhesive vinyl Floor tiles, roll over them with a heavy tile roller (or rolling pin) to help the adhesive bond.

Lastly, don’t wash the floor for a few days to allow the adhesive to cure.

Organizing Your Closet Efficiently

Closet organization is crucial to maintaining calm and order in the home. Organized closets naturally contribute to a neater home. This progression can be explained by the advice passed down from generations of mothers to daughters--a place for everything and everything in its place. Whether your you’ve outgrown your current closet organization system or you’ve never organized a closet at all, there are three things you can do to get your cluttered closets under control.

Closet Organization Begins with Deep Cleaning

Organized closets begin with a serious purge of the closet clutter. Get rid of the seldom (or never) used things that occupy precious storage space and you will free up significant storage space to implement a closet organizing system. Get the biggest box you can find and challenge yourself to fill it as much as possible with closet clutter you don’t need. Drop the box off at a local charity who will share your unwanted closet clutter with people who will truly appreciate (and need) it.

Having a hard time parting with your stuff? While the professionals will frown against this idea, pack rats can ease into a new closet organizing system by reassigning the clutter. You still need to get all of the extras out of your way in order to organize closets, but perhaps you can store it all elsewhere instead of giving it all away. If you just can’t say goodbye, purge the closets and put the fallout in Operate at Maximum Capacity Begin solving your closet mystery by figuring out how much and what kind of space you need. A tape measure and graph paper will come in handy. Group your clothes by season, length or style. Next, measure the length and width of each group of items.

The best way to maximize closet space is to use two rods, one above the other. You will eliminate wasted space between clothes and the floor. In a man’s closet, most items can fit in this double-hung space. Pants will have to be folded over a hanger Women’s blouses, jackets, slacks and short skirts can also hang on the doubled-up rods. Longer items, like dresses and long skirts, will need to hang on a single, higher rod.

For a typical closet, the upper rod should be about 82” from the floor. The lower rod should be about 42” above the floor. For exact spacing, measure your longest items, including the hanger,  and  add  4”.

If possible, shift coats, formal dresses and other long items that are not worn every day to another closet. That will allow you to install full-width double rods in your primary closet for maximum storage. In many cases, though, you will need a combination of single and double rods. You may also want to put in a narrow shelf or two to store sweaters, shoes or other accessories.

For a child’s closet, the bottom rod should be placed low. The upper rod, which will probably be out of the child’s reach, can be used to store out-of-season clothes.

With measurements in hand, go to your local Lowe’s store. Look at all the styles of shelving and    components available to see which one will suit your needs. You will likely be choosing between three materiaIs: coated wire, wood and melamine. Wire products are less expensive and are easily customizable with accessories and add-ons. Solid wood shelving wins accolades for aesthetics, but it costs more and can require more skill to install. Melamine is similar to wood, but is less expensive.

Examining all the choices may even give you some creative inspiration, prompting you to regroup your things and measure again.

Putting It Together

Prepackaged kits are usually more economical than buying individual components. These kits typically include everything you need to do a 5 to 8-foot wide, reach-in closet. You can also buy extra components and shelving, if you need it.

If you do not want to us a kit, you can buy wire shelving by the linear foot. The store will cut it to the size you need. Be careful to buy all the components from the same manufacturer, because many are not interchangeable.

Look for wire shelves with continuous sliding rods. Known  as “SuperSlide” or “FreeSlide” these allow your hangers to move uninterrupted across the entire bar. You will also find some without rods called line shelves. These sometime come in a style with closer mesh that is great for kitchen pantries and other places that might house small  items.

Installation for all types of closet systems requires only a drill screwdriver and hammer. Read Installing Wire Shelving for in depth instructios

If you need flexibility in the use of the space, consider using adjustable-height rods and shelves, As fashions change, so do hemlines, and you might want to rearrange your clothing storage. Or a bedroom may become a home office, with a closet that once stored clothing now housing paper, supplies etc.

If you closet has only a single door, consider enlarging the opening and replacing the door with a pair of wider bi-fold or sliding doors. They allow easier access to the entire closet.

Organization is not just for small closets where every inch counts. Larger, walk-in closets can also benefit from more efficient space.

Utilization. Double rods, built- in drawers, and pullout baskets can all provide more convenient storage in any size closet.

There are many different ways to store shoes. Over-the-door shoe hangers and floor units are two common solutions. You can also organize your shoes din cubbyholes or shelves. Get creative! Some people have built shelves all the way around an entire room for shoes. It’s functional and interesting and interesting décor at the same time.

Cut it out

Give your new closet a fresh start by ridding yourself of the clutter. Just because it came out when you started organizing does not mean it has to go back in.

Consider potential use, rather than past, in deciding what to keep. If you have not worn it at least once in a the past year, odds are you will never wear it again. If your weeding process results in a small discard pile, you probably were not ruthless enough. Get a friend who is not emotionally involved to help. He or she might even volunteer to take some of it off your hands.